SACO100A Sample Concentrator RT+5°C to 160°C


  • RT+5–160 °C
  • PID control
  • 0.1 °C display
  • ≤15 min to 160 °C
  • Up to 24 positions

1.550,00

SACO100A-Sample Concentrator

  • RT+5–160 °C
  • PID control
  • 0.1 °C display
  • ≤15 min to 160 °C
  • Up to 24 positions

 RT+5 °C to 160 °C


Overview

The SACO100A is a nitrogen blowdown sample concentrator that uses a high-purity aluminum block with PID control to heat tubes uniformly while directing dry N2 across the liquid surface. Parallel evaporation shortens turnaround for residue analysis, food & environmental testing, and pharmaceutical QC.

Working principle

A warmed block plus directed nitrogen reduces the boundary layer and boosts mass transfer at the surface. Needles are positioned a few millimeters above the liquid to drive evaporation without bubbling or aerosolization. Temperature, total flow, and time are controlled for consistent endpoints.

Applications

  • Concentration of SPE/elution fractions prior to GC/LC.
  • Pesticide, mycotoxin, veterinary drug, and general residue workflows.
  • Food/flavor extracts; environmental water/soil eluates.
  • General solvent removal with parallel throughput and temperature control.

Operation (quick start)

  1. Select the proper block insert (tube diameter) and preheat to set temperature.
  2. Load tubes; set the timer (1–99 h 59 min or continuous ∞).
  3. Lower needles so tips are ~5–10 mm above the liquid surface.
  4. Open the regulator and set total N2 flow; fine-tune if rows are split.
  5. Monitor volume; adjust temperature/flow to avoid bumping or splashing.
  6. At endpoint, close gas, lift needles, and remove tubes with PPE.

Technical specifications

Temperature range RT+5 °C to 160 °C
Temperature accuracy ±0.5 °C (@40 °C); ±1 °C (@120 °C)
Temperature uniformity ±0.5 °C
Display accuracy 0.1 °C
Timer 1–99 h 59 min / ∞
Heat-up time ≤15 min (25 °C → 160 °C)
Needle length 150 mm
Max gas usage 15 L/min (dry, oil-free N2)
Recommended gas pressure ≤16 needles: ~0.02 MPa; >16 needles: ~0.05 MPa
Block quantity 1 aluminum block (interchangeable inserts)
Max power 300 W
Voltage AC 220 V or 110 V, 50–60 Hz
Dimensions (W×D×H) 260 × 220 × 450 mm
Weight 7.0 kg

Block options / tube formats

Model Tube diameter / type Quantity
PRO4585 Ø10 mm 24
PRO4518 Ø12 mm 24
PRO4519 Ø13 mm 24
PRO4520 Ø15 mm 16
PRO4521 Ø16 mm 16
PRO4522 Ø19 mm 12
PRO4523 Ø20 mm 12
PRO4524 Ø26 mm 8
PRO4525 Ø28 mm 4
PRO4526 Ø40 mm 3
PRO4529 1.5 mL centrifuge tube 24
PRO4530 2.0 mL centrifuge tube 24

Installation & safety

  • Operate under a fume hood; handle flammable/toxic solvents with care.
  • Supply dry, oil-free nitrogen with regulator and flowmeter; check fittings regularly.
  • Wetted parts: stainless-steel needles and PTFE tubing (verify solvent compatibility).

Maintenance

  • Clean/replace needles periodically; inspect O-rings and tubing.
  • Verify flow stability and temperature calibration at routine intervals.
  • Keep the block free of spills and debris to preserve uniformity.
Note: SACO100A is a nitrogen blowdown concentrator (not a vacuum centrifugal concentrator). For vacuum concentration needs, see the “Vacuum Concentrators” category.
SKU: PRO4584 Category: Tag:
Magnetic Stirrers

,

Temp range: RT.+5°C -160°C
Temp accuracy: ±0.5℃(@40℃)
Temp accuracy: ±1℃(@120℃)
Temp uniformity: ±0.5℃
Display accuracy: 0.1℃
Time Range: 1-99h59min/∞
Heating time: ≤15min(from 25℃ to 160℃)
Max vertical travel: 150mm
Max gas usage: 15L/min
Max gas pressure: 0.05Mpa
Block qty: 1
Max power: 500W
Voltage: AC220V or AC110V/50~60Hz
Size: 220x310x385mm
Weight: 7.5kg

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

You may also like…